(ERROR MESSAGE) LD1 fault Amada FCLAJ
(ERROR MESSAGE) LD1 fault Amada FCLAJ
(OP)
I'm waiting to hear back from Amada California. But here are my alarms. Right now nobody knows what the root cause of this is. When the machine is idle I can clear the alarms, As soon the beam is turned on these alarms shoot up. No beam = No production. Does anybody know anything that could help?





RE: (ERROR MESSAGE) LD1 fault Amada FCLAJ
RE: (ERROR MESSAGE) LD1 fault Amada FCLAJ
RE: (ERROR MESSAGE) LD1 fault Amada FCLAJ
RE: (ERROR MESSAGE) LD1 fault Amada FCLAJ
RE: (ERROR MESSAGE) LD1 fault Amada FCLAJ
For those who may not know. This machine has linear motors on it. I think XY and Z. I would think it's the drive that sends power to the magnets. But I would like to know which axis and if it's a linear motor they sent or just the drive unit.
RE: (ERROR MESSAGE) LD1 fault Amada FCLAJ