Solid65 Stress relaxation
Solid65 Stress relaxation
(OP)
I found here a thread relating to Solid65 element after-crack behaviour:
http://www.eng-tips.com/viewthread.cfm?qid=249974
However, the thread is closed, so I started this one.
ansysfreak mentioned undocumented option:
When you want to use stress relaxation there is a undoc. keyopt(7)=2 (it works)
Do you have any explanation for this option? What does it exactly do?
Thanks in advance,
Zoran
http://www.eng-tips.com/viewthread.cfm?qid=249974
However, the thread is closed, so I started this one.
ansysfreak mentioned undocumented option:
When you want to use stress relaxation there is a undoc. keyopt(7)=2 (it works)
Do you have any explanation for this option? What does it exactly do?
Thanks in advance,
Zoran




