Creating an Associated Offset Datum Plane at a compound angle to CSYS - NX10
Creating an Associated Offset Datum Plane at a compound angle to CSYS - NX10
(OP)
I know how to create an offset datum plane. I know how to create an angled datum plane. I can even create an offset, angled datum plane. BUT... I don't know how to add that "2nd angle."
A little help here, please.
Thank you.
A little help here, please.
Thank you.





RE: Creating an Associated Offset Datum Plane at a compound angle to CSYS - NX10
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Creating an Associated Offset Datum Plane at a compound angle to CSYS - NX10
RE: Creating an Associated Offset Datum Plane at a compound angle to CSYS - NX10
www.nxjournaling.com
RE: Creating an Associated Offset Datum Plane at a compound angle to CSYS - NX10
RE: Creating an Associated Offset Datum Plane at a compound angle to CSYS - NX10
www.nxjournaling.com
RE: Creating an Associated Offset Datum Plane at a compound angle to CSYS - NX10
RE: Creating an Associated Offset Datum Plane at a compound angle to CSYS - NX10
www.nxjournaling.com