NX10 Cavity Mill Non-Cutting moves missing Departure dialog
NX10 Cavity Mill Non-Cutting moves missing Departure dialog
(OP)
Hi All,
In NX10.0.3 Non-Cutting Moves, using Cavity Mill or Z Level (that I have noticed) I no longer have Departure moves in Between Regions and Within Regions. Am I missing something, aren't they supposed to be there, If so how do I get them back? They exist in the Surface Area drive method. I've attached a pic
Thanks,
Rick D
In NX10.0.3 Non-Cutting Moves, using Cavity Mill or Z Level (that I have noticed) I no longer have Departure moves in Between Regions and Within Regions. Am I missing something, aren't they supposed to be there, If so how do I get them back? They exist in the Surface Area drive method. I've attached a pic
Thanks,
Rick D
Win7 64 bit w/NX9.0.3.4 MP9 and NX10.0.3
Vericut 7.4





RE: NX10 Cavity Mill Non-Cutting moves missing Departure dialog
Nothing different in NX 10 - those options have never been available in the level type operations, such as Cavity Milling and Z-Level. They are of course available in surface contouring.
Mark Rief
NX CAM Customer Success
Siemens PLM Software
RE: NX10 Cavity Mill Non-Cutting moves missing Departure dialog
I did some digging and noticed they were never there as you say. For some reason I never really noticed they were not there. Guess old age is setting in :)
Rick D
Win7 64 bit w/NX9.0.3.4 MP9 and NX10.0.3
Vericut 7.4