Calculation minimum Z Retract
Calculation minimum Z Retract
(OP)
One interesting project. 5-Axis CNC, after each operation 3+2 moving to ZMAX, then down, and repeat it each time. I add DLL, linked to postprocessor, and calculate minimum Z_retract. One note - this CNC machine havenot TRAORI, CYCLE800 only. In this case I make 100 intermediate position for Z min calc..
[img https://community.plm.automation.siemens.com/t5/im...]
Link
[img https://community.plm.automation.siemens.com/t5/im...]
Link




