Long bearing for 3/16" shaft
Long bearing for 3/16" shaft
(OP)
Hi, I'm looking for a long cylindrical bearing to press on 3/16" shaft, would need to be 2" long and as small OD as possible. Any thoughts?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
Long bearing for 3/16" shaft
|
RE: Long bearing for 3/16" shaft
http://www.jtekt-na.com/engineering-tools/catalog-...
(download the needle catalog and look on page B-2-54)
I doubt there is anything 3/16" x 2". But why not put one on each end with a spacer?
Any information on the speed and loading of the bearing?
RE: Long bearing for 3/16" shaft
RE: Long bearing for 3/16" shaft
RE: Long bearing for 3/16" shaft
http://www.westwind-airbearings.com/pcb/index.html