SD card for SAIA PDC3.R600 module?
SD card for SAIA PDC3.R600 module?
(OP)
Hi there. I have a standard SD 1GB, Sandisk, card which works in the PLC, however, i bought some 2GB SD cards, formatted to FAT16, shrinked the partition to 1GB, and are not recognized by the PLC.
Is something i'm missing?
This is the module:
https://www.sbc-support.com/uploads/tx_srcproducts...
I'd help any tip!!! Thanks!
Is something i'm missing?
This is the module:
https://www.sbc-support.com/uploads/tx_srcproducts...
I'd help any tip!!! Thanks!




