manway rung design
manway rung design
(OP)
Dear all,
For internal manway rung design as shown in the attachment, can type # 1 be accepted in the United States without violating OSHA safety requirements ?
For internal manway rung design as shown in the attachment, can type # 1 be accepted in the United States without violating OSHA safety requirements ?





RE: manway rung design
Regards,
Mike
The problem with sloppy work is that the supply FAR EXCEEDS the demand
RE: manway rung design
Regards
r6155
RE: manway rung design
The rungs of an individual-rung ladder shall be so designed that the foot cannot slide off the end. A suggested design is shown in figure D-1.
https://www.osha.gov/OshStd_gif/10dfd_1.gif