Broms Method
Broms Method
(OP)
I would like to create a spreadsheet to determine the lateral capacity of a single embedded pile using the Broms method. This method involves several charts. You lookup one unitless parameter on the X-axis to determine another unitless parameter on the Y-axis. I've made an attempt to back-calculate the equations of the lines on these charts, but haven't succeeded. Does anyone have any information that will help me find these equations? I've attached a couple of pages from a PDF including two of the charts I'm having trouble with.
Thanks in advance.
Thanks in advance.






RE: Broms Method
The Florida Department of Transportation also has an excellent, freely available MathCAD sheet on drilled shafts that I've used for this: Link. If you have the ability to view it, it might jump start your efforts to parse out the underlying equations.
I like to debate structural engineering theory -- a lot. If I challenge you on something, know that I'm doing so because I respect your opinion enough to either change it or adopt it.
RE: Broms Method
RE: Broms Method
I like to debate structural engineering theory -- a lot. If I challenge you on something, know that I'm doing so because I respect your opinion enough to either change it or adopt it.