Any good books?
Any good books?
(OP)
I have some knowledge on AutoCAD 2002, as far as 3D stuff goes, but the change to using Microstation V8, is being a little too hard.
Is there any good books on Microstation, I prefer if the examples are engineering oriented, as some of the books out there are only for architects.
Thanks in advance.
Is there any good books on Microstation, I prefer if the examples are engineering oriented, as some of the books out there are only for architects.
Thanks in advance.





RE: Any good books?
You can find all tutorials and other sources on Bentley's web. you may find there what you need. address is below...
http://docs.bentley.com/dl.asp
RE: Any good books?
http://www.aecdesignware.com/
http://www.askinga.com/
http://www.axiomint.com/
http://www.bentley.com/
http://www.delcom.com/msdir/freesoft.html
http://www.cadchat.com/forums/
http://www.caddepot.com/
http://www.easint.com/
http://www.hlbtech.com/
http://www.intergraph.com/documents/alldept.htm
http://www.intergraph.com/
http://www.nws.usace.army.mil/cadd/mdl_ucm.htm
http://www.delcom.com/msdir
http://www.msmonline.com/
http://www.dot.state.ny.us/caddinfo/design/caddsettings/microstation/micros.html
http://www.tmc.org/
http://www.workplacewisdom.com/
These are some links I've collected ... related to MicroStation.
They ain't books, but I hope they help.
Rich
RE: Any good books?
http://www.wfl.fha.dot.gov/geopak/idiot2001/idiot2001.htm
Good Luck
Namdac