×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Wind loads on an irregular structure

Wind loads on an irregular structure

Wind loads on an irregular structure

(OP)
I'm looking at sports facility type structure, it's about 400'x400' and steps in the center from an elevation of 155' to 185'. I've attached a picture of it's profile, which basically extends into the page for 400 feet (some reentrant corners though.)

We're designing the lateral system and I was just wondering, would it be okay to use the MWFRS Directional Procedure to estimate the lateral forces for some preliminary calculations? And when it comes to determining actual forces for use in design, can any of the procedures in the code be used or would this be considered too irregular a structure and thus require a wind tunnel study?

Structural Engineering Intern

RE: Wind loads on an irregular structure

I would say that for the most part, most the buildings i work on are irregular shapes. With that being said, I have also never done a wind tunnel study and don't know of anyone who has. To the best of my knowledge, wind loading is not an exact science and thus using your engineering judgement to determine an appropriate wind load based on your building and using the wind code would be acceptable by most engineers. I typically use method 2 in the ASCE 7. Pretty straight forward design process. They used to design buildings for 20 psf lateral load and that was it and those buildings are still standing.... If you want to be most accurate though, then yes you would have to use a wind tunnel study.

RE: Wind loads on an irregular structure

While not a box, I wouldn't say it is that irregular. I would just use ASCE7 and some engineering judgement.

RE: Wind loads on an irregular structure

(OP)
Thanks for the responses, I guess as an intern I'm still missing some of the experience to make judgments comfortably but will try my best. Gonna talk to a superior now about how loads transfer into the diaphragm and then to braced frames, perhaps that will shed some light on these matters.

Structural Engineering Intern

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources