Co-ordinate table
Co-ordinate table
(OP)
I am using NX 7.5.
I have a flat drill plate with approx 50 holes in it. Can I create a co-ordinate table with X & Y values on my drawing without measuring each hole position in the solid model?
Many thanks.
I have a flat drill plate with approx 50 holes in it. Can I create a co-ordinate table with X & Y values on my drawing without measuring each hole position in the solid model?
Many thanks.





RE: Co-ordinate table
Home -> CAD -> Drafting -> Tables and Parts Lists -> Hole Tables
www.nxjournaling.com