Bering seal
Bering seal
(OP)
Hi
I'm new in here so I would like to ask for forbearance. I'm wonder if any one of you use quad ring as a bearing upper ring seal-see attachments. I know that preferable will be V-ring but.. I don't have enough space. Thank you for all your answers.
I'm new in here so I would like to ask for forbearance. I'm wonder if any one of you use quad ring as a bearing upper ring seal-see attachments. I know that preferable will be V-ring but.. I don't have enough space. Thank you for all your answers.





RE: Bering seal
What spins, what is stationary, what is the fit between the bearing ID and OD and other components, etc, etc.
The yellow beveled cover appears to have a gap and make no contact with the housing.
The X ring seals the cover to the bearing outer race, as long as the groove is proportioned and finished correctly.
So there is a path from the outside world thru the gap, and possibly along the outer race OD and into the bearings.
Some bearings are numbered with stamped or etched characters that are quite deep.
http://duiser.com/wp-content/uploads/2013/04/timke...
I'd be concerned deeply numbered bearings would provide a path past the X-ring.