etap user
etap user
(OP)
I'm an etap user. my problem is in the load flow, there is an alert which keep persisting. The alert is over excitation in my swing Generator. I have 4 Generators in parallel, 3 are in voltage control and 1 in swing mode. In my swing Generator, I've tried lowering the design voltage to 99%, it gets worst. Tried also raising the Qa, still the same. tnx for any help






RE: etap user
If possible please upload the model to see the problem. Otherwise giving a straight answer is bit of a problem
RE: etap user
RE: etap user