TOUCH SCREEN TECHNOLOGI FOR NX.............
TOUCH SCREEN TECHNOLOGI FOR NX.............
(OP)
I am very excited about this new enhancement.
1) Which are the hardware requirements (PC capabilities)in order to use the Touch Screen technology?
2) And which are the main benefits of using Touch Screen versus the classic version?
3) Could the Touch Screen technology be used with old NX releases?
Thjanks
1) Which are the hardware requirements (PC capabilities)in order to use the Touch Screen technology?
2) And which are the main benefits of using Touch Screen versus the classic version?
3) Could the Touch Screen technology be used with old NX releases?
Thjanks
MZ7DYJ





RE: TOUCH SCREEN TECHNOLOGI FOR NX.............
Hook it up to a large monitor and you can use the Tablet's screen as your Spacemouse :)
NX 9.0.3.4
NX 10 (Testing)
Windows 7 64 (Windows 8.1 Tablet)
RE: TOUCH SCREEN TECHNOLOGI FOR NX.............
I have also a Venus Pro I Tablet ans I confirm that NX10 run very well
With older version You will not have special touch screen fonction (only rotate ans zoom)
Regards
Didier Psaltopoulos
http://www.psi-cad.com
RE: TOUCH SCREEN TECHNOLOGI FOR NX.............
http://community.plm.automation.siemens.com/t5/NX-...
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: TOUCH SCREEN TECHNOLOGI FOR NX.............
MZ7DYJ
RE: TOUCH SCREEN TECHNOLOGI FOR NX.............
(http://www.amazon.com/Acer-DA220HQL-21-5-Inch-Andr...).
This is actually a big size Android tablet: (http://ecx.images-amazon.com/images/I/81tcBEQ0yDL....)
Would this Android tablet work with NX 10.0?
MZ7DYJ
RE: TOUCH SCREEN TECHNOLOGI FOR NX.............
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: TOUCH SCREEN TECHNOLOGI FOR NX.............
MZ7DYJ
RE: TOUCH SCREEN TECHNOLOGI FOR NX.............
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: TOUCH SCREEN TECHNOLOGI FOR NX.............
Have you installed the NX 10 on those tablets? Which "Dell Venue Pro Tablet" do you have? There are a few of them (Dell Venue 8 Pro 3845, Dell Venue 11 Pro, Dell Venue 8 Pro Tablet 32, etc)................
Also, wouldn't be better to use a laptop instead of a tablet?
What would be the difference between using a tablet vs using a laptop?
Thanks again!
MZ7DYJ
RE: TOUCH SCREEN TECHNOLOGI FOR NX.............
I have a Dell M6600 that I use in the office, but when at home or travelling, the Tablet is more convenient. I have a keyboard cover for travelling and it has a permanent dock when in the office.
Whilst it's not as powerful as my M6600, it certainly works extremely well when it's needed.
NX 9.0.3.4
NX 10 (Testing)
Windows 7 64 (Windows 8.1 Tablet)