×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

How much of a pressure vessel can i replace and it still be considered a repair?

How much of a pressure vessel can i replace and it still be considered a repair?

How much of a pressure vessel can i replace and it still be considered a repair?

(OP)
We have a small 8" heat exchanger bonnet that is pretty much shot except for the head. My question is, can we keep the head, and replace the two nozzles, shell portion, the flanges and the pass partition and still have it considered a repair?

RE: How much of a pressure vessel can i replace and it still be considered a repair?

(OP)
The repair company that we typically use say that there is a certain percentage that is used to determine whether or not it can be repaired. He is checking with his AI. As far as I know, the NBIC doesn't define at what point it's considered a repair and at what point it is considered that a "U" Stamp company has to make it.

RE: How much of a pressure vessel can i replace and it still be considered a repair?

Yes.

RE: How much of a pressure vessel can i replace and it still be considered a repair?

You have to keep one 'component'* plus the Code Data Plate. One or more components, not any percentages. Somewhat counterintuitive, but replacing existing components "in kind" is just a repair, because the vessel is not being redesigned/altered. You are only returning the vessel back to its original condition. In the nuclear end of ASME, there is a much better set of terms; Rework or Repair. Rework = make the vessel like new [thus replace a damaged component]. Repair = make the vessel/component fully serviceable, but not necessarily 'as-new'. Weld buildup on a 'wasted' ell is Repair, replacing that ell with a new one is Rework.

*And the next repair can replace that remaining original component.

RE: How much of a pressure vessel can i replace and it still be considered a repair?

"*And the next repair can replace that remaining original component."

I remember in the old Dixie Gun Works catalogs, they had a "letter" from a customer relating how they had an antique tomahawk. "It's had 7 new handles and 5 new heads, but it's still in really good shape!". I did not realize you could do that with vessels.

RE: How much of a pressure vessel can i replace and it still be considered a repair?

In some of the older NBIC, repairs could not be carried out if the thickness was over 50% depending where the repairs or replacements had to be made.

RE: How much of a pressure vessel can i replace and it still be considered a repair?

I can tell you that the NBIC committee had wrestled with how much of a pressure vessel can be replaced up to and including having only the original nameplate attached to a piece of the shell and data report. Under current rules, the extent of replacement under a repair is based on two factors; the judgement of the Inspector and concurrence by the Jurisdiction, if applicable. If the object is regulated, the Jurisdiction has final say as to the extent of pressure part replacement.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources