Creating a Flat Face from one with waves NX 8.5
Creating a Flat Face from one with waves NX 8.5
(OP)
Hello all,
I'm new in the field and i've been thrown into an unfamiliar program. I'm currently working on a model to be printed on our Metal Sintering machine. To do so, I need to flatten the inside of my model or else we will have printing errors. I have attached a quick print screen of the model. I'm not sure what the best way to go about creating a smooth wall on the inside, any guidance would be much appreciated.
Thank you,
Mike C
I'm new in the field and i've been thrown into an unfamiliar program. I'm currently working on a model to be printed on our Metal Sintering machine. To do so, I need to flatten the inside of my model or else we will have printing errors. I have attached a quick print screen of the model. I'm not sure what the best way to go about creating a smooth wall on the inside, any guidance would be much appreciated.
Thank you,
Mike C





RE: Creating a Flat Face from one with waves NX 8.5
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Creating a Flat Face from one with waves NX 8.5
RE: Creating a Flat Face from one with waves NX 8.5
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Creating a Flat Face from one with waves NX 8.5
Apologies for being vague
RE: Creating a Flat Face from one with waves NX 8.5
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Creating a Flat Face from one with waves NX 8.5
RE: Creating a Flat Face from one with waves NX 8.5
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Creating a Flat Face from one with waves NX 8.5
RE: Creating a Flat Face from one with waves NX 8.5
RE: Creating a Flat Face from one with waves NX 8.5
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Creating a Flat Face from one with waves NX 8.5
RE: Creating a Flat Face from one with waves NX 8.5
The "multiple loops" message probably indicates a similar situation with your section curves, a set of section curves that is not connected.
www.nxjournaling.com
RE: Creating a Flat Face from one with waves NX 8.5
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.