Catproduct with broken links
Catproduct with broken links
(OP)
Hello ,
after copying from one drive to another a big assembly I got all the links broken and I don´t know how to recover all the data.
Is it possible to relink alll the subcatproducts in one shoot?
Attached the screeenshot.
Many thanks and regards
after copying from one drive to another a big assembly I got all the links broken and I don´t know how to recover all the data.
Is it possible to relink alll the subcatproducts in one shoot?
Attached the screeenshot.
Many thanks and regards





RE: Catproduct with broken links
You can use info from the bellow threads for example:
http://www.eng-tips.com/viewthread.cfm?qid=346938
http://www.eng-tips.com/viewthread.cfm?qid=198922
Regards
Fernando
https://picasaweb.google.com/102257836106335725208
https://picasaweb.google.com/103462806772634246699...
RE: Catproduct with broken links
superthanks for the help.
I used the short manual recommended by DBezaire and now i can load the big assembly from my local drive at home.
http://www.eng-tips.com/viewthread.cfm?qid=346938
Regards
RE: Catproduct with broken links
Regards
Fernando
https://picasaweb.google.com/102257836106335725208
https://picasaweb.google.com/103462806772634246699...