Valve trim material
Valve trim material
(OP)
Dear All,
Crude details are as follows:
Pressure = 55 psig, H2s mole fraction = 0.0011 and partial pressure of H2S = 0.07667 psia, NACE Sour = YES and
Formation water analysis: Chloride content = 161500 mg/l and pH=5.7
Please suggest me how to select valve trim material based on NACE MR 0175?
Crude details are as follows:
Pressure = 55 psig, H2s mole fraction = 0.0011 and partial pressure of H2S = 0.07667 psia, NACE Sour = YES and
Formation water analysis: Chloride content = 161500 mg/l and pH=5.7
Please suggest me how to select valve trim material based on NACE MR 0175?





RE: Valve trim material
RE: Valve trim material
I'm just one step away from being rich, all I need now is money.
( read somewhere on the internet)