Analogue measuring Systems for a Siemens CNC
Analogue measuring Systems for a Siemens CNC
(OP)
does anyone know the type of resolver/Inductor sym used on the old Siemens CNC System 8.
The cards in the system 8 are the MS311 and the MS230, I need a feedback system which can be used on these old cards
Contact
Paul
richards31@yahoo.com
The cards in the system 8 are the MS311 and the MS230, I need a feedback system which can be used on these old cards
Contact
Paul
richards31@yahoo.com





RE: Analogue measuring Systems for a Siemens CNC
http://www.pennineuk.com/cnc-parts.htm
or contact
http://search.siemens.com/cgi-bin/index.pl?prim=imp&quart=fibonacci/en/contact_en.html
for more info