Comparison of ASTM D1693 and D 5397 NCTL ESCR
Comparison of ASTM D1693 and D 5397 NCTL ESCR
(OP)
We have a specification for HDPE which calls for the material to meet 10,000 hours when tested in accordance with ASTM D1693 F50
The material has been tested to ASTM 5397 NCTL at 50 degree c and failed after 200 to 600 hours.
Is there any way that I can correlate the different tests?
The material has been tested to ASTM 5397 NCTL at 50 degree c and failed after 200 to 600 hours.
Is there any way that I can correlate the different tests?





RE: Comparison of ASTM D1693 and D 5397 NCTL ESCR
Chris DeArmitt PhD
President - Phantom Plastics LLC
Consulting, ideas and training on plastic materials
www.phantomplastics.com
RE: Comparison of ASTM D1693 and D 5397 NCTL ESCR