7 axis post processor for CITIZEN A32
7 axis post processor for CITIZEN A32
(OP)
Hi
I am willing to create a post processor for 7 axis CITIZEN A32. Please let me know how to start multi axis machining in UG NX Post builder in 7.5 version , I have little bit experience in turn mill 4 axis post processor, please do the needful how to get start in nx post builder
Thanking you
I am willing to create a post processor for 7 axis CITIZEN A32. Please let me know how to start multi axis machining in UG NX Post builder in 7.5 version , I have little bit experience in turn mill 4 axis post processor, please do the needful how to get start in nx post builder
Thanking you





RE: 7 axis post processor for CITIZEN A32
Regards,
Tomas
RE: 7 axis post processor for CITIZEN A32
Thank you for your response but i need training how to get start with and how to do multi axis post processor
RE: 7 axis post processor for CITIZEN A32
chose which post and its kinematics.
if you dont have any experience you will be tired.this machine is a type of swiss machine, i have build my post for star sr32 which is similar
that yours. if you need my post send me what you want in your post. codelinker@hotmail.com
RE: 7 axis post processor for CITIZEN A32
Regards,
Tomas
RE: 7 axis post processor for CITIZEN A32
If you cannot take the instructor led class, then at least go through some of the many videos available on the Siemens Manufacturing Community site. Search for "post builder" on http://community.plm.automation.siemens.com/t5/Tech-Tips-Knowledge-Base-NX/tkb-p/open_forum_1%40tkb
Mark Rief
NX CAM Customer Success
Siemens PLM Software