×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Timber deck failure in pedestrian bridge

Timber deck failure in pedestrian bridge

RE: Timber deck failure in pedestrian bridge

Interesting. Back in 2000 I was involved with the design of a ballasted timber railroad bridge. The deck was made of longitudinal parallams stressed together with transverse prestressing rods. Luckily before the thing got built, we found some literature that said that parallams can swell transversely as much as 8%. We were able to specify certain manufacturing details and wood species to minimize swelling. We also put plate spacers between parallams to give the swelling a place to go. What a nightmare it would have been if the prestressing rods failed and went shooting down the river. At the time, I did a lot of research into stress laminated decks and did not see much about swelling.

RE: Timber deck failure in pedestrian bridge

From that one picture and description, it is difficult to identify the material used, and also how it was restrained. Any further information?

RE: Timber deck failure in pedestrian bridge

(OP)
My understanding is the deck was constructed of about 3' or 4' sections of some type of glulam lumber laying on edge. I do not know what species of wood it was. There was no room left anywhere for the wood to expand and contract. A clip is attached to a recessed bolt in the lumber. The clip goes under the top flange of the stringers to hold the deck onto the stringers. Apparently as the timber expanded the clips just slid along the top flange, they weren't enough to restrain the expansion forces.

The bridge is over an interstate, so I imagine there couldn't be any openings in the deck to protect traffic below. I'm not sure why no one thought about the expansion and contraction of the wood.

RE: Timber deck failure in pedestrian bridge

Kinda shows that glulams are not good in cross-grain bending... induced by laterally-non-constrained compressive forces.

OK. It buckled.

Looks like someone was trying to save the heels of high heels.

Mike McCann, PE, SE (WA)


Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources