Weld Overlay
Weld Overlay
(OP)
Is there any requirements for PWHT due to application of Weld Overlay (CS backing material + Alloy 625-3mm weld overlay) on piping, manifold?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: Weld Overlay
RE: Weld Overlay
RE: Weld Overlay
"If you don't have time to do the job right the first time, when are you going to find time to repair it?"
RE: Weld Overlay
RE: Weld Overlay
ISO 21457 - maximum iron content at the finished surface shall be 10 weight percent.
Norsok M001 - maximum iron content at the finished surface shall be 10 weight percent.
RE: Weld Overlay