2D Geometry not automatically displaying in drafting views
2D Geometry not automatically displaying in drafting views
(OP)
Just noticed with NX9, if you add 2D geometry (associative lines and arcs) to the model, if you now want that geometry to display in drawing views they have to be explicitly updated.
Is that correct ?
Is that correct ?
NX 9.0.2.5 (Desperate for 9.0.3)
NX 10 (Testing)
Windows 7 64 (Windows 8.1 Tablet)





RE: 2D Geometry not automatically displaying in drafting views
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: 2D Geometry not automatically displaying in drafting views
Create a block, add a base Top view to the drawing.
Go back to the model, draw a line on the top face of the block.
Return to the drawing, the line isn't displayed. I'm using Entire Part reference set.
Certainly didn't work that way in NX6.
NX 9.0.2.5 (Desperate for 9.0.3)
NX 10 (Testing)
Windows 7 64 (Windows 8.1 Tablet)
RE: 2D Geometry not automatically displaying in drafting views
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.