Cold forging
Cold forging
(OP)
I am a Mech. Eng. and working in Cold forging related industry, As i am new to this field and learning about tool and Die design
i need specifically cold forging related literature or technical data how to design tools and dies .
Hope experienced Guys help me here
Thanks in advance
Simran Hunjan
i need specifically cold forging related literature or technical data how to design tools and dies .
Hope experienced Guys help me here
Thanks in advance
Simran Hunjan





RE: Cold forging
Doc 3/82 General Aspects of Tool Design and Tool Materials for Cold and Warm Forging
Doc 6/82 General Recommendations for Design, Manufacture and Operational Aspects of Cold Extrusion Tools for Steel
https://www.icfg.info/no_cache/virtual-laboratory/...
Read this article and look for some of the references:
Learning Cold Forming Technology — Another Engineer’s Perspective
http://www.bluetoad.com/publication/?i=196015&...
Here are some good downloads that are free:
Tooling solutions for challenges in cold forging
http://www.umformtechnik.net/binary_data/2425559_1...
http://www.strecon.com/Tools---Containers-700.aspx
http://www.strecon.com/Precision-Forging-726.aspx
http://www.strecon.com/2006---2010-793.aspx
http://www.strecon.com/2000---2005-794.aspx
Heading Hints - A Guide to Cold Forming Specialty Alloys
http://www.cartech.com/uploadedFiles/Products/Prod...
PREDICTION OF FATIGUE LIFE OF COLD FORGING TOOLS BY FE SIMULATION AND COMPARISON OF APPLICABILITY OF DIFFERENT DAMAGE MODELS
http://www.kau.se/sites/default/files/Dokument/sub...
Tooling solutions for cold and warm forging applications for automotive and other segments
http://www.istma.org/istma-world/ISTMA_Conferenceh...
Improvement of product accuracy and tool life at precise cold forming by suitable die prestressing
http://www.rmz-mg.com/letniki/rmz57/RMZ57_0465-047...
The main aspects of precision forging
http://www.acme.pwr.wroc.pl/repository/191/online....
http://www.simufact-americas.com/references/
http://www.qform3d.com/?go=publications
http://www.deform.com
www.c3m.si/colt/presentations/03%20Procedure.pps