×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

NVIDIA Quadro K4000

NVIDIA Quadro K4000

NVIDIA Quadro K4000

(OP)
I see that NVIDIA Quadro is certified for NX (NX7.5 here for a short while longer), but does that include K4000? I am having the issue of toolbars freezing which has come up before. I see IE9 has been to blame before, but before I get it uninstalled, do you agree that Internet Explorer is likely the issue?

Thanks,
KLINE

RE: NVIDIA Quadro K4000

Have you checked with GTAC yet?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

RE: NVIDIA Quadro K4000

(OP)
Hi John, I did check the list at GTAC. That is where I got the "NVIDIA Quadro" but I was unsure if the "K4000" extension on that makes it part of the same series (and therefore still good).

And while I have your attention. I'm really hoping to just move to a later version of NX. We've had this SOA error plauging us for some time now and GTAC could only help by saying we need a later release. It is something to do with running NX7.5 on a virtual server with Teamcenter Express. It really is less than ideal only being able to load one assembly at a time. Also, we have a random issue of NX losing connection with the server. This one is pretty random, but GTAC seemed to think that was an issue with the release we have (7.5.0.32). Would you mind throwing your opinions out on these two issues too? (I am not going down the GTAC road with them further as I really want to test it all on the newer release, but I'm still curious to hear your opinion.)

KLINE

RE: NVIDIA Quadro K4000

I have NO special insight into anything which deals with Teamcenter, but if GTAC says that a newer version of NX will resolve these issues, then I would do as they suggested. After all, it's been 4 years since NX 7.5 was released and a lot of maintenance has gone into the subsequent releases to say nothing of any potential changes to Teamcenter Express.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

RE: NVIDIA Quadro K4000

(OP)
Thanks for the reply John, we'll try to get it done! I'll post back here if the issues magically disappear.

Have a great weekend,
KLINE

RE: NVIDIA Quadro K4000

If it disappears, it will be far from 'magical', at least I wouldn't tell any of our developers that elf

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources