Some options are missing in NX9 Pattern Feature
Some options are missing in NX9 Pattern Feature
(OP)
Hi,
The following options are missing in NX9 Pattern Feature:
1°) Boundary Definition
2°) Pattern Increment
3°) Orientation
Is it right or am I wrong ?
You can try with the NX8.5 attached part file
I have found that it is correct in beta NX10 but what about the NX9 ?

The following options are missing in NX9 Pattern Feature:
1°) Boundary Definition
2°) Pattern Increment
3°) Orientation
Is it right or am I wrong ?
You can try with the NX8.5 attached part file
I have found that it is correct in beta NX10 but what about the NX9 ?

Regards
Didier Psaltopoulos
http://www.psi-cad.com





RE: Some options are missing in NX9 Pattern Feature
See that DOWN-pointing arrow at the bottom of the dialog. Click-it so that it points UP. When it's DOWN, the dialog is in the 'Less' mode. When it points UP you're in the 'More' mode. You can also control this by selecting the More and Less option under the 'Gear' icon in the upper-left corner of the Dialog.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Some options are missing in NX9 Pattern Feature
I'm relieved.
I have forgotten this setting and I thought that Reset Button would open hidden options
And It was more clear in NX8.5 with 3 "vvv". do you agree with me
Regards
Didier Psaltopoulos
http://www.psi-cad.com
RE: Some options are missing in NX9 Pattern Feature
But it gets better when you zoom-in and look at some of the detail on the outside:
Or on the inside for that matter:
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Some options are missing in NX9 Pattern Feature
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Some options are missing in NX9 Pattern Feature
Thank a lot for your congratulations.
This is the first exercise for all my trainings. I add news for each version (Realize Shape for the nose in NX9 for example).
Regards
Didier Psaltopoulos
http://www.psi-cad.com
RE: Some options are missing in NX9 Pattern Feature
I am sure that you will enjoy the last version
Regards
Didier Psaltopoulos
http://www.psi-cad.com