×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

G10 L12

G10 L12

(OP)
how can i set post builder to output right after tool list or
before or after tool change such a code G90 G10 L12 PXX RXX
PXX XX=tool number, RXX xx=tool radius
seems to be pretty easy to output this code but my problem is first tool.
instead of first tool radius post outputs last tool radius value
N3 (TOOL #2 DRILL-2.5 )
N4 G90 G10 L12 P2 R3.000

R3.000 for a drill dia. 2.5mm???. last tool in the program is end mill dia. 6.0mm

post and file attached



Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources