Old Australian Channel : 4 Inch x 2 Inch RSC (Channel) : Need geometry!!
Old Australian Channel : 4 Inch x 2 Inch RSC (Channel) : Need geometry!!
(OP)
Hi Everyone
I need some info (preferably a photocopy extract) from an old Australian AISC Book that has the RSC (channel in it). Specifically the 4" x 2" channel (but the hole page would be handy)
many thanks
I need some info (preferably a photocopy extract) from an old Australian AISC Book that has the RSC (channel in it). Specifically the 4" x 2" channel (but the hole page would be handy)
many thanks






RE: Old Australian Channel : 4 Inch x 2 Inch RSC (Channel) : Need geometry!!
I have a 1958 book with old imperial sections in it, and there a couple of 4x2 channels listed.
Any use if I scan it?
RE: Old Australian Channel : 4 Inch x 2 Inch RSC (Channel) : Need geometry!!
RE: Old Australian Channel : 4 Inch x 2 Inch RSC (Channel) : Need geometry!!
If possible, I would like to have the empirical units (inches etc.)
Thanks for this Guys.
RE: Old Australian Channel : 4 Inch x 2 Inch RSC (Channel) : Need geometry!!
http://www.engineersedge.com/standard_material/Ste...
http://www.metrosteelfl.com/structural-channels.ht...
http://www.statesteel.com/sscatalog.pdf
On the last reference see page 11
RE: Old Australian Channel : 4 Inch x 2 Inch RSC (Channel) : Need geometry!!
Thanks Again
RE: Old Australian Channel : 4 Inch x 2 Inch RSC (Channel) : Need geometry!!
BA