Having trouble constraining to intersection
Having trouble constraining to intersection
(OP)
I am working with NX 8.5 and I'm trying to constrain a sketch to an intersection that I created from the step model I'm working with. When I click on the constraining tool it will not select the intersection sketch. What am I missing here?





RE: Having trouble constraining to intersection
www.jcb.com
NX 7.5 with TC 8.3
RE: Having trouble constraining to intersection
RE: Having trouble constraining to intersection
In NX7.5 the default selection scope was "within work part only".
It seems to have changed in NX8.5 to "within active sketch only" which actually isn't very useful at all, since in most "typical" models there is nothing outside the first sketch (so no problem), and all subsequent sketches are attached to geometry.
Does anyone know if there is a default that can be changed to return default sketch selection scope to "work part"?
www.jcb.com
NX 7.5 with TC 8.3
RE: Having trouble constraining to intersection
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Having trouble constraining to intersection
My apologies, confused myself by doing too many things at once!
www.jcb.com
NX 7.5 with TC 8.3