Harp Type Slug Catcher Minimum Clearance Between Storage Fingers
Harp Type Slug Catcher Minimum Clearance Between Storage Fingers
(OP)
Hello all,
I am wondering if there are any CODE or STANDARD requirements for the minimum clearance between the storage fingers of a harp type slug catcher. We are using B31.8 for the piping with a flanged-bolt up assembly. so I assume you would want a few feet of clearance for installation. We currently have about 2 ft of clearance.
Anyone have any other information or suggestions?
Thanks
I am wondering if there are any CODE or STANDARD requirements for the minimum clearance between the storage fingers of a harp type slug catcher. We are using B31.8 for the piping with a flanged-bolt up assembly. so I assume you would want a few feet of clearance for installation. We currently have about 2 ft of clearance.
Anyone have any other information or suggestions?
Thanks





RE: Harp Type Slug Catcher Minimum Clearance Between Storage Fingers
A drawing, sketch or photo would be very useful if you post any more queries.
My motto: Learn something new every day
Also: There's usually a good reason why everyone does it that way
RE: Harp Type Slug Catcher Minimum Clearance Between Storage Fingers
I hate Windowz 8!!!!