SW 2010 - Sheet Metal Forming Tool
SW 2010 - Sheet Metal Forming Tool
(OP)
I am creating a custom forming tool.
[URL=http://s21.photobucket.com/user/Tarthrin/media/WOR...]
[/URL]
Here is the result.
[URL=http://s21.photobucket.com/user/Tarthrin/media/WOR...]
[/URL]
It sortof works, but not quite.
[URL=http://s21.photobucket.com/user/Tarthrin/media/WOR...]
[/URL]
Is this something that I need to fix in the forming tool, or how I am applying it?
[URL=http://s21.photobucket.com/user/Tarthrin/media/WOR...]
[/URL]Here is the result.
[URL=http://s21.photobucket.com/user/Tarthrin/media/WOR...]
[/URL]It sortof works, but not quite.
[URL=http://s21.photobucket.com/user/Tarthrin/media/WOR...]
[/URL]Is this something that I need to fix in the forming tool, or how I am applying it?






RE: SW 2010 - Sheet Metal Forming Tool
Added fading radii
[URL=http://s21.photobucket.com/user/Tarthrin/media/WOR...]
But I still get some funky corners on the backside.
[URL=http://s21.photobucket.com/user/Tarthrin/media/WOR...]
RE: SW 2010 - Sheet Metal Forming Tool
Successfully gusseted bracket:
[URL=http://s21.photobucket.com/user/Tarthrin/media/WOR...]
Final tool shape:
[URL=http://s21.photobucket.com/user/Tarthrin/media/WOR...]
I have also attached a copy of the tool part if anyone is interested.
RE: SW 2010 - Sheet Metal Forming Tool
http://help.solidworks.com/2014/English/solidworks...
RE: SW 2010 - Sheet Metal Forming Tool
RE: SW 2010 - Sheet Metal Forming Tool
But there are a lot of web sites and YouTube videos on this.
Example: Link
Chris, CSWA
SolidWorks 13
ctopher's home
SolidWorks Legion