amada laser lc1212 funuc 16-i controller conditions question
amada laser lc1212 funuc 16-i controller conditions question
(OP)
hi,
I have question regarding Amada laser older pulsar ,we spent lot of time to developed cutting condition funuc 16-I controller .The last year we trade laser for new Pulsar NT . I have readout conditions from old one but there is no way to write it to NT .Does anybody know any program to view my old condition I swear my old machine had better condition than new one ....................
Thanks
I have question regarding Amada laser older pulsar ,we spent lot of time to developed cutting condition funuc 16-I controller .The last year we trade laser for new Pulsar NT . I have readout conditions from old one but there is no way to write it to NT .Does anybody know any program to view my old condition I swear my old machine had better condition than new one ....................
Thanks





RE: amada laser lc1212 funuc 16-i controller conditions question
2: cutting conditions depend on a lot of things, including the optics of the laser and the machine itself.
It also depends a bit on the performance and tuning of the motion system. Even if they call the new machine a Pulsar, they may have improved or tweaked the axes performance, and that will affect how they tune the cutting parameters in the corners, etc.
What kinds of materials? Unusual super-custom stuff, or materials that are already in the cutting parameters of the new machine?
Jay Maechtlen
http://www.laserpubs.com/techcomm
RE: amada laser lc1212 funuc 16-i controller conditions question
Thanks
RE: amada laser lc1212 funuc 16-i controller conditions question
Usually there is some offline method of doing that.
Which Amada office do you work with?
Jay Maechtlen
http://www.laserpubs.com/techcomm
RE: amada laser lc1212 funuc 16-i controller conditions question
will send him e-mail tomorrow again.............
Thanks
RE: amada laser lc1212 funuc 16-i controller conditions question
Jon@beamworksllc.com
It may take a few days for me to get to it.
Max speed on a 4kw is 120ipm. That is the from factory.