"Shell Spec" Valve vendors - (Ball & Globe)
"Shell Spec" Valve vendors - (Ball & Globe)
(OP)
hi all, I have been trying to get a valve vendors whose products (ball and globe valves) meet shell MESC SPE 77/300A on an urgent basic without much success.Can anyone with knowledge or suggestion of a valve vendor out there that can satisfy these requirement please help.
For info:
Ball valve, FB, 3/4" NB 150# to ISO-17292
Globe valve, straight pattern, 2" 150# RF to BS-1873
All are SEP category, PED fluid group 1 service suitability
thanks all.
For info:
Ball valve, FB, 3/4" NB 150# to ISO-17292
Globe valve, straight pattern, 2" 150# RF to BS-1873
All are SEP category, PED fluid group 1 service suitability
thanks all.





RE: "Shell Spec" Valve vendors - (Ball & Globe)
Corrosion resistant, exotic alloy valves from The Alloy Valve Stockist in Barcelona, Spain http://valvestockist.com
RE: "Shell Spec" Valve vendors - (Ball & Globe)
After some frantic digging, we've found some old stocks that meets our requirements in-house.
Your time/response is appreciated. I now have one more stockist on my list to contact in future.
Thanks
RE: "Shell Spec" Valve vendors - (Ball & Globe)