help with meshed cross sections in ABAQUS
help with meshed cross sections in ABAQUS
(OP)
I am trying to use the 'meshed cross section' which would find the cross sectional properties and then use them in my main file. But I am persistently getting an error that my properties are not being assigned due to some reason.
could anyone please help me and let me know whats wrong in this?
[attachments]
{main file: main_file.inp}
{cross sectional file: warping_test.inp}
the warping_test file needs to be run first which will automatically generate a 'warping_test.bsp' file in the same folder (which is already referenced in the main file)
please reply incase you have the time..
thanks in advance.. :)
could anyone please help me and let me know whats wrong in this?
[attachments]
{main file: main_file.inp}
{cross sectional file: warping_test.inp}
the warping_test file needs to be run first which will automatically generate a 'warping_test.bsp' file in the same folder (which is already referenced in the main file)
please reply incase you have the time..
thanks in advance.. :)





RE: help with meshed cross sections in ABAQUS
I am using Ubaqus student version, to apply FEM to mollecular Modeling for a given protein (xx.pdb)
Any advice!