Catia V5 Exams
Catia V5 Exams
(OP)
Hi All
Friday just gone I took 3 Catia exams, Part Design, Assembly Design and Surfacing. Unfortunately and embarrassingly I failed all 3
Has anyone got any advice and or best way to perhaps revise for the 3 exams somewhat?
I appreciate it's somewhat a vague and silly question but I really do not wish to fail for the second time round
Best Regards
Friday just gone I took 3 Catia exams, Part Design, Assembly Design and Surfacing. Unfortunately and embarrassingly I failed all 3
Has anyone got any advice and or best way to perhaps revise for the 3 exams somewhat?
I appreciate it's somewhat a vague and silly question but I really do not wish to fail for the second time round
Best Regards





RE: Catia V5 Exams
So get DS training would be first advice
Do not underestimate the power of experience
You have to be REALLY smart to pass the test right after taking the course.
indocti discant et ament meminisse periti
RE: Catia V5 Exams
Plus the CATIA exams are really, really pricey. Certainly for that they are.
RE: Catia V5 Exams
Webbo1981,
The Companion tool is pretty helpful in prepping for the exam.
I found my some automation experience helped me most.
Because you really need to know how something is modeled if you're going to successfully apply any automation against it.
KevinDeSmet,
I hear all the new exams run by DS will be hands-on sessions.
They are pretty pricey; but, you can get a discount in certain situations.
(I hear the COE conference will offer the V6 exam for $99.)
RE: Catia V5 Exams
here is a sample of the questions for such an exam. in some ways it's good and in some ways it's bad (encourages blind memorization of random icons for example, instead of the theory such as q9), just like the default DS training (the drilling machine one).
advanced exams are already taken with an instructor present.
RE: Catia V5 Exams
RE: Catia V5 Exams
I have got five certifications in CATIA..
You just need to concentrate on Catia Documentaion which you get along with CATIA.
Also you should know every option in a dialog box while working on catia.
Dialog box means window you get while creating Pad, fillet, pattern or anything like this.
There are so many things or options in dialog box, you should know to pass these exams
All the best..
... Rangrao
RE: Catia V5 Exams
I have retaken Part Design exam and passed, now onto Assembly
Thanks
RE: Catia V5 Exams
RE: Catia V5 Exams
The exam is based on your knowledge of Catia. This means you have no idea of what questions you are going to be asked. There is no revise as such. It helped me in away to fail the first exam so I knew what type of questions I was going to be asked next time round. All I can advise is use the Part Design workbench, or what ever relevant workbench it, as much as you can before going for the exam
RE: Catia V5 Exams
not an ideal type of exam if you ask me.
RE: Catia V5 Exams
RE: Catia V5 Exams
Assembly design exam is difficult one among all specialist level exams. Study carefully regarding use of compass, constraints relationships...
RE: Catia V5 Exams
Yes I remember the Assembly Design being difficult. I need to brush up on constraints relationships I have to say. They what caught me out last time.