Qyt. in the Title Block
Qyt. in the Title Block
(OP)
Hi,
I could automate to propagate attributes to the Drawing's Title Block but the Qty.
Since the file names are unique to this project, the parts with a drawing will not be used in any other project. Therefore Assembly's Qty could be a static value (A constant) for those parts driven by the system saved in the part's attribute.
How could I do this?
I could automate to propagate attributes to the Drawing's Title Block but the Qty.
Since the file names are unique to this project, the parts with a drawing will not be used in any other project. Therefore Assembly's Qty could be a static value (A constant) for those parts driven by the system saved in the part's attribute.
How could I do this?
Michael Fernando (CSWE)
www.solidCADworks.com
Tool and Die Designer
Siemens NX V8.5 + PDW
SWX 2013 SP3.0 X64
PDMWorks 2013
Logopress3
FastForm Advance
FormatWorks





RE: Qyt. in the Title Block
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli