×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Crack survey

Crack survey

Crack survey

(OP)
Dear All

Upon deshuttering formwork on road barrier concrete casting the horizontal or longitudinal cracks are developing on-site as seen in the attached photo. Its new jersey crack as commonly know.

Anyone possibly ascertain the reasons and preventive measures?

Thanks in advance..

RE: Crack survey

I assume this is reinforced concrete. My guess is that during the placement the concrete wasn't brought up to top of the formwork; then, additional concrete was added to bring it flush after the underlying concrete had set up.

RE: Crack survey

Cracks occurred while the lower concrete was in a plastic state and the upper concrete was drying, hardening and expanding longitudinally relative to the mass below. The crack occurs at the transition between the two. The top is unrestrained and the lower part is protected from drying.

Do a petrographic examination through the crack and you'll likely see that the coarse aggregate is not fractured in the crack...the cement paste separated from the coarse aggregate as the top dried out.

RE: Crack survey

(OP)
Thanks for valuable notes. Are these cracks not due to formwork imperfection ? How can we possibly avoid such cracks from occurring other than to protect the freshly placed concrete from dry wind, sun etc ?

These cracks are occurring on daily basis

RE: Crack survey

That looks like a plastic settlement crack. Lack of consolidation would be my guess. Not only do you need to improve vibration, but probably need to revibrate after some period of time. The lower concrete has settled under its own weight, leaving the top part behind. Something may be restricting the top part from moving down, but I wouldn't venture a guess as to what that may be.

RE: Crack survey

hokie66...I agree. I think the top part is being held up by "bridging" caused by drying and initial strength gain.

RE: Crack survey

Could be some bars in the top are hanging it up as well. I wonder if the verticals have hooks at the top, or even if they are made into a "U" shape. Horizontal bars can do it as well, especially if the cage is welded. Perhaps sarabia05 can enlighten us further. I don't think it is a formwork issue.

RE: Crack survey

Really wet mix, perhaps? High shrinkage, formwork flexibility or displacement, poor consolidation and curing practices, formwork and/or soil extracting moisture from the uncured paste, settlement under the concrete while in the semi-set state. A properly reinforced barrier should not do this if the concreting practices are sound.

RE: Crack survey

Sarabia05,

A followup on this would be appreciated. We would like to know if your problem is solved. Many miles of New Jersey barrier have been constructed all over the world without this type of cracking, so it must be something in your process that is deficient. Settlement of the plastic concrete below top reinforcement, concrete that is too soupy, lack of consolidation, etc. have been suggested. Probably all of the above, but rather than guess, we would like to know your conclusions.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources