ASCE 7-10 External Pressure Coeffient (GCp)
ASCE 7-10 External Pressure Coeffient (GCp)
(OP)
I'm attempting to create a spreadsheet that tabulates design wind pressures for specific tributary areas.
Fig. 30.4-1 shows a graph of external pressure coefficient (GCp) vs effective wind areas (for Walls on enclosed/partially enclosed buildings with h<=60 ft). I notice this graph is logarithmic.
Is there any place I can find the logarithmic function pertaining to ASCE 7-10, for the GCp value so that I may implement it on my spreadsheet?
Thanks in advance!
Fig. 30.4-1 shows a graph of external pressure coefficient (GCp) vs effective wind areas (for Walls on enclosed/partially enclosed buildings with h<=60 ft). I notice this graph is logarithmic.
Is there any place I can find the logarithmic function pertaining to ASCE 7-10, for the GCp value so that I may implement it on my spreadsheet?
Thanks in advance!






RE: ASCE 7-10 External Pressure Coeffient (GCp)
for example (I think you are lucky and can see these in the preview)
http://books.google.com/books?id=pR_e3l79vxoC&...
I thought there was another place as well, but I can't seem to find it...
EIT
www.HowToEngineer.com
RE: ASCE 7-10 External Pressure Coeffient (GCp)