Mold Designing
Mold Designing
(OP)
Hey Guys
I am new to mold design world, I want to design a mold and am not able to get any tool room trg.
I have done ug and online trg programme for mold design.
I want to design a mold with each and every detail with out mold wizard help.
can you guys please guide me like the general arrangement assembly in 2plate and 3 plate mold.
I will be happy to learn.
If any one has .prt file for ug please upload
Rgds
Nick
I am new to mold design world, I want to design a mold and am not able to get any tool room trg.
I have done ug and online trg programme for mold design.
I want to design a mold with each and every detail with out mold wizard help.
can you guys please guide me like the general arrangement assembly in 2plate and 3 plate mold.
I will be happy to learn.
If any one has .prt file for ug please upload
Rgds
Nick





RE: Mold Designing
RE: Mold Designing
All I want to know if I have to make a plastic box mold ....what design consideration I have to take.
height of ejector pin, ejector rail, guide pillar length and dia etc...
what factors governs the above data.
Rgds
Nick
RE: Mold Designing
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Mold Designing
Thanx for reply
Most of the industry in india do not use mold wizard due to cost factor and
Rely on designer to design a mold and even core and cavity are extracted rather
Than using mold wizard.
I am asking beacuse i want to know the factors involved in mold designing
If i am able to design one mold manually my concept will be clear
Rgds
Nick
RE: Mold Designing
And most important is EXPERIENCE.
RE: Mold Designing
which training is that? post a link.
RE: Mold Designing
Please post link.............. ;0
Proud Member of the Reality-Based Community..
To the Toolmaker, your nice little cartoon drawing of your glass looks cool, but your solid model sucks. Do you want me to fix it, or are you going to take all week to get it back to me so I can get some work done?
RE: Mold Designing
visit the website and you will come to know the modules there
thanx
RE: Mold Designing
http://webhotel2.tut.fi/projects/caeds/tekstit/sta...
it won't teach you making molds from start to finish though, but the basics are good.
RE: Mold Designing
You need to design molds, then see, listen and learn on if or how that mold actually works in reality.
-Can it open, -was the applied tolerances too tight / too large, -how did the cooling work , etc etc
Then take that knowledge into consideration when designing the next mold.
It's easy to design something that looks like a mold but which doesn't work in reality.
Have a look at the video here :
This guy probably thinks that he's drawing a propeller for a ship.
-He has probably never been even close to a real propeller.
http://www.youtube.com/watch?v=1uHvwTTb3yk
Regards,
Tomas
RE: Mold Designing
this guy is actually a CAD trainer, and very good at that.
you do design props like that though. you usually get a set of curves from the CFD department that describe the geometry and then you sweep them to make a part.
http://www.basic.si/index.php?menu=menu2&glavn...
RE: Mold Designing
RE: Mold Designing