Hi,
I found following:
GENERAL PROPULSION
Elements of Gas Turbine Propulsion,
by J.D. Mattingly, 1996, McGraw-Hill, Inc
Aerothermodynamics of Gas Turbine and Rocket Propulsion, 3rd ed.,
by G.C. Oates, 1997, AIAA Education Series, AIAA
Hypersonic Airbreathing Propulsion,
by W.H. Heiser and D.T. Pratt, 1994, AIAA Education Series, AIAA
Aircraft Engines and Gas Turbines, 2nd ed.,
by J.L. Kerrebrock, 1992, MIT Press, Cambridge, MA
Mechanics and Thermodynamics of Propulsion, 2nd ed.,
by P.G. Hill and C.R. Peterson, 1992, Addison-Wesley Publishing Company, Inc.
Gas Turbine Theory, 4th ed.,
by H. Cohen, G.F.C. Rogers, and H.I.H. Saravanamuttoo, 1996, John Wiley and Sons
Fundamentals of Gas Turbines, 2nd ed.,
by W.W. Bathie, 1996, John Wiley and Sons, Inc.
An Introduction to Aerospace Propulsion,
by R.D. Archer and M. Saarlas, 1996, Prentice-Hall
Jet Propulsion for Aerospace Applications, 2nd ed.,
by W.J. Hess and N.V. Mumford, 1964, Pitman Publishing Corporation
Gas Turbines,
by H.A. Sorensen, 1951, The Ronald Press Co.
AERODYNAMICS
Introduction to Aeronautics, A Design Perspective,
by Brandt, Stiles, Bertin, and Whitford, 1997, AIAA Education Series, AIAA
Introduction to Flight, 4th ed.,
by J.D. Anderson, 1999, McGraw-Hill, Inc
Fundamentals of Hydro- and Aero-Mechanics,
by Prandtl and Tiejens, 1957, Dover Publications, Inc.
Theory of Wing Sections,
by I.H. Abbott and A. E. von Doenhoff, 1959, Dover Publications, Inc.
AIRCRAFT DESIGN
Fundamentals of Aircraft Design,
by L.M. Nicolai, 1984, METS, Inc., San Jose, CA.
Aircraft Design: A Conceptual Approach, 3rd ed.,
by D.P. Raymer, 1999, AIAA Education Series, AIAA
Aircraft Performance and Design,
by J.D. Anderson, 1999, McGraw-Hill, Inc
Introduction to Aircraft Performance, Selection and Design,
by F.J. Hale, 1984, John Wiley and Sons, Inc.
Thrust and Drag: Its Prediction and Verification,
by E.E. Covert (ed.), 1985, Volume 98, Progress in Astronautics and Aeronautics, AIAA
AIRCRAFT ENGINE DESIGN and PERFORMANCE
Aircraft Engine Design,
by J.D. Mattingly, W.H. Heiser, and D.H. Daley, 1987,
AIAA Education Series, AIAA
Aircraft Gas Turbine Engine Technology, 3rd ed.,
by I.E. Treager, 1995, Glencoe McGraw-Hill, Inc.
Aircraft Propulsion Systems Technology and Design,
by G.C. Oates (ed.), 1989, AIAA Education Series, AIAA
High-Speed Flight Propulsion Systems,
by S.N. Murthy and E.T. Curran (eds.), 1991, Volume 137,
Progress in Astronautics and Aeronautics, AIAA
Jet Propulsion: A Simple Guide to the Aerodynamics and
Thermodynamics Design and Performance of Jet Engines,
by N. Cumpsty, 1998, Cambridge Engine Technology Series, No 2
Gas Turbine Performance,
by Walsh and Fletcher, 1998, ASME Press
COMBUSTION, BURNERS, AFTERBURNERS
Chemistry Problems in Jet Propulsion, by S.S. Penner, 1957, Pergamom Press
Gas Turbine Combustion, 2nd ed.,
by A.H. Lefebvre, 1998, Taylor and Francis
Combustion Theory, by F.A. Williams, 1965, Addison-Wesley Publishing Co.
Combustion and Mass Transfer,
by D.B. Spalding, 1979, Pergamon Press
Combustion, Aircraft Propulsion,
by J. Grobman, R.E. Jones, and C.J. Marek, NASA SP-259,
U. S. Government Printing Office, Washington DC, 1970.
Aerothermodynamics of Aircraft Engine Components,
by G.C. Oates (ed.), 1985, AIAA Education Series, AIAA
Aircraft Propulsion Systems Technology and Design,
by G.C. Oates (ed.), 1989, AIAA Education Series, AIAA
CONTROLS
Control of Aircraft and Missile Powerplants,
by A.J. Sobey and A.M. Suggs, 1963, John Wiley and Sons, Inc.
INLETS
Intake Aerodynamics, 2nd ed.,
by J. Seddon and E.L. Goldsmith, 1999, AIAA Education Series, AIAA
Practical Intake Aerodynamic Design,
by E.L. Goldsmith and J. Seddon (eds.),1993, AIAA Education Series, AIAA
Aircraft Propulsion Systems Technology and Design,
by G.C. Oates (ed.), 1989, AIAA Education Series, AIAA
MATERIALS
Aerospace Structural Metals Handbook,
1984, Batelle Memorial Institute, Columbus Laboratories, Columbus, OH.
The Superalloys,
by C.T. Sims and W.C. Hagel, 1972, John Wiley and Sons, Inc.
Structure and Properties of Engineering Alloys, 2nd ed.,
by W.F. Smith, 1993, McGraw-Hill, Inc.
Structure and Properties of Engineering Materials, 4th ed.,
by R.M. Brick, A.W. Pense, and R.B. Gordon, 1977, McGraw-Hill, Inc.
NOZZLES
Aircraft Propulsion Systems Technology and Design,
by G.C. Oates (ed.), 1989, AIAA Education Series, AIAA
ONE DIMENSIONAL COMPRESSIBLE FLOW
"Equations, Tables and Charts for Compressible Flow," NACA Report 1135,
U. S. Government Printing Office, Washington DC, 1953.
Modern Compressible Flow with Historical Perspective, 2nd ed.,
by J. Anderson, 1990, McGraw-Hill
Gas Dynamics, Volumes I and II,
by Zucrow and Hoffman, 1976, John Wiley and Sons, Inc.
The Dynamics and Thermodynamics of Compressible Fluid Flow, Volumes I and II,
by A.H. Shapiro, 1953, The Ronald Press Company
TURBOMACHINERY (COMPRESSORS, FANS, and TURBINES)
Fluid Mechanics and Thermodynamics of Turbomachinery, 4th ed.,
by S.L. Dixon, 1998, Butterworth-Heinemann
Aerothermodynamics of Aircraft Engine Components,
by G.C. Oates (ed.), 1985, AIAA Education Series, AIAA
Aircraft Propulsion Systems Technology and Design,
by G.C. Oates (ed.), 1989, AIAA Education Series, AIAA
Axial Flow Compressors,
by J.H. Horlock, 1973, Robert E. Krieger Publishing Co.,
Axial Flow Turbines,
by J.H. Horlock, 1973, Robert E. Krieger Publishing Co.
Aerodynamic Design of Axial-Flow Compressors,
I.A. Johnsen and R.O. Bullock (eds.), NASA SP-36,
U. S. Government Printing Office, Washington DC, 1965.
Turbine Design and Application, Vols. 1-3,
Glassman, A.J. (ed.), NASA SP-290,
U. S. Government Printing Office, Washington DC, 1972.
The Design of High-Efficiency Turbomachinery and Gas Turbines, 2nd ed.,
by D.G. Wilson and T. Korakianitis, 1998, MIT Press
Compressor Aerodynamics,
by N.A. Cumpsty, 1989, Longman Scientific & Technical
Regards
Fernando
Reference Book(s)