Punch Tools
Punch Tools
(OP)
Hi All,
Can anyone offer a link or advice on how to create one's own punch tool.
Best Rgds,
Dave R
Can anyone offer a link or advice on how to create one's own punch tool.
Best Rgds,
Dave R
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: Punch Tools
Sorry I meant to tell you that I'm using Inventor Pro 2011.
Best Rgds,
Dave R.
RE: Punch Tools
Start a new sketch on the face and delete any auto-projected geometry.
Place a sketch point for locating the punch tool.
Continue creating features as needed.
Publish iFeature (as Punch).
Post your file here when you get stuck.
http://lmgtfy.com/?q=autodesk+inventor+punch+tool+...
RE: Punch Tools
http://usa.autodesk.com/adsk/servlet/item?siteID=1...
Just make sure you only have 1 center point..
RE: Punch Tools
Got it!! I was going wrong in two places - Not putting a centre point and not using the Insert IFeature on the Manage tab.
My next question is on Dies - see my next post.
Best Rgds,
Dave R