Copy Paste Sketch in NX8.5
Copy Paste Sketch in NX8.5
(OP)
I found a strange behaviour or maybe a bug in NX8.5 when using copy paste a sketch with named expression.
Try to copy paste the sketch MOUTH in NX7.5 without any link with the original sketch (create new expression) ==> all expressions are new
Now
Try to do the same with NX8.5
==> the angular dimension p327 becomes p331 in the sketch MOUTH_0 that it's right
== > But R and R_mouth remain linked that it's wrong
So the function doesn't work with named expression.
Thanks in advance to confirm, then I will open a call to GTAC
Try to copy paste the sketch MOUTH in NX7.5 without any link with the original sketch (create new expression) ==> all expressions are new
Now
Try to do the same with NX8.5
==> the angular dimension p327 becomes p331 in the sketch MOUTH_0 that it's right
== > But R and R_mouth remain linked that it's wrong
So the function doesn't work with named expression.
Thanks in advance to confirm, then I will open a call to GTAC
Regards
Didier Psaltopoulos
http://www.psi-cad.com





RE: Copy Paste Sketch in NX8.5
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Copy Paste Sketch in NX8.5
Thanks to have a look
In the same part
Regards
Didier Psaltopoulos
http://www.psi-cad.com
RE: Copy Paste Sketch in NX8.5
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RE: Copy Paste Sketch in NX8.5
Thanks a lot for your confirmation I thought to become crazy.
I will open a call
Regards
Regards
Didier Psaltopoulos
http://www.psi-cad.com
RE: Copy Paste Sketch in NX8.5
Can you share the PR in here..I would like to keep track on it as well...
Many thanks in advance..
Ronald van den Broek
Mechanical Engineer
Cad Environment Coordinator
Wärtsilä, Propulsion Services
NX8.5.2 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5