mixer motor
mixer motor
(OP)
Dear guru;
There is a mixer motor 75 kw runing with VSD.
But having some high vibration at 40-50 hz.
We are suspecting that may be bearing problem.
Currently,this is single taper bearing but client advise to change to both taper bearing in x shape??
Please advise whether we need for both taper bearing ornot?
Normally ;How many bearing we required for mixtor motor at shaft.
Thanks
There is a mixer motor 75 kw runing with VSD.
But having some high vibration at 40-50 hz.
We are suspecting that may be bearing problem.
Currently,this is single taper bearing but client advise to change to both taper bearing in x shape??
Please advise whether we need for both taper bearing ornot?
Normally ;How many bearing we required for mixtor motor at shaft.
Thanks





RE: mixer motor
Good luck,
Latexman
Technically, the glass is always full - 1/2 air and 1/2 water.