×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Flange to casing of OH2 API Pumps

Flange to casing of OH2 API Pumps

Flange to casing of OH2 API Pumps

(OP)
Dear Friends,

I would like to know if someone knows where I can find the dimensions of a flange casing for OH2 API pumps. I have SULZER pumps OH2, model CAP8-80-290, CAP5-50 -350, CAP8-80-430 and a need to manufacture flange to casing, for when I take the rotor out of pump.

RE: Flange to casing of OH2 API Pumps

We refer to these as case blinds. When we remove a pump like this, we either have to blind both the suction and discharge flanges, or install a case blind over the open case. We were able to measure the OD and bolt pattern in the field and turn out the rough plate in advance. Our fixed equipment group defined the required thickness of the plate based on standard requirements for pipe flange blinds. We cut the step on the inside of the plate to fit the head gaskets that we had in our warehouse. We also have pump repair sheets from previous repairs that include the ID of the case bore and the OD of the head at the fit area. This is a standard check that our mechanics make to verify that the head to case fit is still within specifications.

It would have been easier if the pump manufacturers would have provided these dimensions. But, for obvious reasons, they are reluctant to give out any dimensions that might be used by non-OEM shops to produce parts for their pumps.

Johnny Pellin

RE: Flange to casing of OH2 API Pumps

(OP)
Hi Johnny, thank you for your information. Here we do the same, we measured the diameter of the holes and uses Class ASME pressure to the flange. However, believed that some colleagues had the dimensions. Sulzer offered me the flanges for the purchase, obviously, but we decided to make them ourselves.

engmau46

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources