Multiple electromagnetic clutch
Multiple electromagnetic clutch
(OP)
Hi all,
I'm very new to this topic. Basically I want to arrange a driving member (a toy/printer motor) and a line of 4 driven members (aligned one by one alone a line). Each driven member needs to be able to on/charged or off/discharged randomly. I'm thinking of using electromagnetic clutch for each driven member but don't know how to arrange them. Please help. Any tips/samples are welcomed!
TIA
-sean
I'm very new to this topic. Basically I want to arrange a driving member (a toy/printer motor) and a line of 4 driven members (aligned one by one alone a line). Each driven member needs to be able to on/charged or off/discharged randomly. I'm thinking of using electromagnetic clutch for each driven member but don't know how to arrange them. Please help. Any tips/samples are welcomed!
TIA
-sean





RE: Multiple electromagnetic clutch
RE: Multiple electromagnetic clutch
Mike Halloran
Pembroke Pines, FL, USA
RE: Multiple electromagnetic clutch
"Will work for (the memory of) salami"
RE: Multiple electromagnetic clutch
I might point out that until you get to the point of energizing the motor or clutches, this is not an electrical problem, it's mechanical.
"Will work for (the memory of) salami"
RE: Multiple electromagnetic clutch
Sorry for my limited knowledge to understand above. Can you draw few lines? I'm a computer programmer :)
RE: Multiple electromagnetic clutch
Drawings; $150/hour.
Here's a free hint: go down to a friendly old bowling alley and ask to watch the pin resetters from the back side.
"Will work for (the memory of) salami"
RE: Multiple electromagnetic clutch
"Will work for (the memory of) salami"
RE: Multiple electromagnetic clutch