Profilograph testing for bituminous ride quality
Profilograph testing for bituminous ride quality
(OP)
What is the average cost per day to run a profilograph measuring device?
One is needed for a mill and overlay project. The profilograph testing will be needed at the end of each working shift to measure the ride quality of the paving placed on that particular day prior to opening back up to traffic. The actual test should not take more than an hour.
One is needed for a mill and overlay project. The profilograph testing will be needed at the end of each working shift to measure the ride quality of the paving placed on that particular day prior to opening back up to traffic. The actual test should not take more than an hour.





RE: Profilograph testing for bituminous ride quality
http://www.smoothroad.com/
Good luck.
RE: Profilograph testing for bituminous ride quality
Given the limited lane closures with moving paving operations in our state, one would likely have to do this under traffic with an escort vehicle.