edit CAM operation attributes and/or parameters via postprocessor
edit CAM operation attributes and/or parameters via postprocessor
(OP)
Could anyone please guide me in this thread?
----
kukelyk
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
edit CAM operation attributes and/or parameters via postprocessor
|
RE: edit CAM operation attributes and/or parameters via postprocessor
Sounds like you need some user function
John Joyce
N.C. Programming Supervisor
Barnes Aerospace, Windsor CT
NX6 & NX7.5
RE: edit CAM operation attributes and/or parameters via postprocessor
In NX9, we added a command MOM_set_attribute that will let you assign attributes to CAM objects from the post, so this will be easier in the future.
Mark Rief
Product Manager
Siemens PLM
RE: edit CAM operation attributes and/or parameters via postprocessor
I though that I need some coding. I think I have to run some kind of batch program through TCL, am I right?
Is it possible to do it only with TCL?
----
kukelyk