Variable contour path: Max. Tool Axis Change
Variable contour path: Max. Tool Axis Change
(OP)
We have five axis machines with Heidenhain controls. Could anyone please suggest some values for 'Max. Tool Axis Change' option for semi and finishing paths? Tolerances are +/-0,01mm and +/-0,003mm. (M128 milling)
We have large mold parts, where we use turnmilling. Tilting is 10..30 degrees.
Thanks in advance.
We have large mold parts, where we use turnmilling. Tilting is 10..30 degrees.
Thanks in advance.
----
kukelyk




